CANOGA PERKINS CanogaView EMS - Manual (Page 16)

CanogaView EMS Installation Guide
(12)
Optional Packages Installation
Installation for optional packages PCS, PCS 9145 Plug-in, PCS 9145E Plug-in, Device Package 9145 and
Device Package 9145E follows a very similar procedure to that of the Core and Report Server.
Follow the installation.txt file included on the installation cd for the appropriate optional package you
wish to install. Each installation.txt file provides a step-by-step guide for the installation.
STEP 7 SUMMARY CONFIGURATION DATA
The Summary Configuration Data window appears and displays installation path information.
Review the data, then click Next to continue.
STEP 8 INSTALLATION
The Installation window copies files from the installation CD to the disk. When the installation
procedure is finished, click Next.
STEP 9 PERFORM EXTERNAL PROCESSES
The Perform External Processes window performs the following:
• Creates Report Server Database
• Installs individual reports
• Deploys Report Server applications
When the Perform External Processes procedure is finished, click Next.
STEP 10 SETUP SHORTCUTS
The Setup Shortcuts window appears. To create shortcuts, be sure the Create shortcuts in the
Start-Menu is checked and then select a location (folder) for the shortcuts in the Select a Program
Group for the Shortcuts window, (e.g. Startup) then click Next. If you accept the default location,
the shortcuts will install in the Start Menu under Programs or All Programs.
When finished, click Next.
STEP 11 INSTALLATION FINISHED
When the Installation Finished window appears it indicates that installation was successful and
displays the location of the uninstall program for the Report Server.
Note the location where you installed this package, as you will require this information should
there be need to uninstall it at a later time.
Click Done, then close the Run window.