CANOGA PERKINS L3xx Media Converter - Manual (Page 3)

Canoga Perkins Corporation, 20600 Prairie Street, Chatsworth, CA 91311-6008
Phone: (818) 718-6300, FAX (818) 718-6312 www.canoga.com
P/N 6942550 Rev A Page 3 of 8
Step 3: Module Installation
Several options for installation are available for the L3xx. For applications requiring multiple
modules in the same location, depending on the size and quantity requirements, the UCS 1000 or
1002 chassis may be used. The UCS 1000 chassis, in conjunction with model 1230 BAM, can
accommodate up to 30 L3xxs and the UCS 1002 can accommodate up to 14 L3xxs. The modules
are also hot-swappable module and can be inserted any time without interruption of service to
other modules.
Insert the L3xx in an available slot in the 1230 or UCS 1002 making sure that the unit is lined-up
with the card guides. The module should slide into the slot with ease and make contact with the
rear connector without excessive force. Tighten the thumbscrew after insertion. The same steps
apply when installing in the UCS 1020 or 1030. See Figures 2 to 5.
Figure 2. L3xx in UCS 1230 and UCS 1000 chassis
Figure 3. L3xx in UCS 1002 chassis
Figure 4. L3xx in UCS 1230 and UCS 1001 chassis