Dynon Avionics EFIS-D100 Installation Guide - Manual (Page 102)

Appendix
7-34 EFIS-D100 Installation Guide
EFIS
DB25
Pin#
Dynon EFIS
harness color
Encoder Converter
Wire Color
Function
13 black on some
Green (May be Red on
older models)
Serial Encoder
Transmit
Blue/White (may be
harnesses)
21 ncoder Ground White Black Serial E
STEP 3: EFIS-D100 ENCODER FORMAT
For proper communication the EFIS Altitude Encoder format must be set to format number one.
To change this setting, from the main menu, select: MORE > SETUP > MORE > ALTENC.
Press FRMAT until it reads “1.”