Dynon Avionics EFIS-D10 Users Guide - Manual (Page 23)

5/25/2005 19
Show/hide display items
From the SETUP submenu, press button 5
corresponding to CLUTTR. The Clutter Menu will
appear with the first four options. Each option
corresponds to an item on the screen that can be turned
on and off. As with all other menu items, these options
are abbreviated to commands containing 6 letters or
fewer. Four toggle options are listed per menu line.
Pressing a button corresponding to one of these four
options will turn the respective onscreen item on or off,
depending on its current state. The first four options
are: ALTBAR (altitude moving tape), ALTDIG
(altitude digital readout), ASPBAR (airspeed moving
tape), and ASPDIG (airspeed digital readout). By
pressing button 5, corresponding to MORE on the menu
readout, four more choices are presented. These are COMPSS (moving heading tape), LATBAL (lateral acceleration
ball), TURNRT (turn rate indicator), and AOABAR (angle of attack tape). Pressing button 5, corresponding to MORE,
will display a third menu of items that can be toggled on and off. These are CLOCK (clock and time zone information),
ROLARW (roll angle indicator), and HORIZN (blue/brown horizon indicator). Pressing MORE will display the first set
of items again. The menu flow is presented in the diagram.
Check software version
The software version submenu gives you two important
pieces of information: the version of EFIS-D10 software
that your unit is currently running and the number of hours