Cisco 4490 - Manual (Page 30)

Chapter 1 Introduction
Hardware Features
1-8
Cisco Global Site Selector 4490 Hardware Installation Guide
78-15755-02
Figure 1-6 shows the location of the GSS back panel ports and receptacles.
Figure 1-6 Global Site Selector 4490 Back Panel Ports and Receptacles
Table 1-4 describes the back panel ports and receptacles.
1 AC power receptacle 2 Ethernet 0 receptacle
3 Ethernet 1 receptacle 4 Console port
97214
1
3 4 2
Table 1-4 Back Panel Ports and Connectors
Item Description
AC power receptacle The AC power cord connects to this plug.
Ethernet 0 port This 10/100/1000BASE-T port is autosensing with
full-duplex capability; it connects your Cisco Global
Site Selector 4490 to the Ethernet LAN.
Ethernet 1 port This 10/100/1000BASE-T port is autosensing with
full-duplex capability; it connects your GSS 4490 to
the Ethernet LAN.
Console port This is a standard RS 232 serial port for connecting
to a console or terminal.