Cisco 4490 - Manual (Page 55)

3-9
Cisco Global Site Selector 4490 Hardware Installation Guide
78-15755-01
Chapter 3 Installing the Cisco Global Site Selector 4490
Installing Your Unit
Figure 3-5 Attaching the Slide Rails to the Rack
7. Insert and tighten two M6 screws to secure the other slide rail assembly to the
rear flange.
8. Align and insert the inner slide rails into the slide rail assemblies until they
lock into place.
9. Slide the GSS 4490 into the rack until it locks into place.
1 Tab 2 Adjustment screw
3 Rear flange
Rear
Front
83199
1
3
2