Key beep volume adjustment, Key beep volume adjustment ‐7 – Dynon Avionics DX15 User Manual
Page 31
Advertising
DX15 User Guide
4‐7
This mode effectively divides up your Memory Channels into 10
scannable banks of up to 10 Memory Channels each.
Key Beep Volume Adjustment
To adjust key beep volume:
Push and hold the SQL button until it says “BEEP XX”. XX represents
the current key beep volume level. (You will need to keep holding the
SQL button as the radio first passes through Side Tone Adjustment,
which is displayed as "Side XX".)
Adjust key beep volume level by using the ◄ and ► buttons.
The display will show 0 through 8; 0 is no key beeps (muted), 8 is loud
key beeps.
To exit Key Beep Volume Adjustment, press the SQL or CLR button, or
wait a few seconds.
Advertising