Dynon Avionics DX15 - Manual (Page 43)

DX15 User Guide 6‐5
Before contacting Dynon Technical Support, please do the following:
 Please have your DX15 at hand; if possible have the AC‐to‐DC Wall
Adapter (charger) also at hand to provide power if there is a battery
issue.
 If possible, please perform the three procedures below to display your
DX15's electronic (internal) software version, hardware version, and
serial number:
 Displaying your DX15's electronic software version:
o Turn power OFF.
o Push and hold the LOCK button.
o Turn power ON while continuing to hold the LOCK
button.
o After an “r” is displayed, release the LOCK button.
o Push the 1 button.
o The number displayed is your DX15's software version.
Please write down this number for the Dynon Avionics
Technician.
 Displaying your DX15's electronic hardware version:
o Turn power OFF.
o Push and hold the LOCK button.
o Turn power ON while continuing to hold the LOCK
button.
o After an “r” is displayed, release the LOCK button.
o Push the 2 button.
o The number displayed is your DX15's electronic
hardware version. Please write down this number for
the Dynon Avionics Technician.
 Displaying your DX15's electronic serial number:
o Turn power OFF.