Leica Geosystems GPS System 500 Equipment - User Manual - Manual (Page 38)

38
GPS Equipment User Manual - 4.0.0en
Getting started with the new Survey equipment
You can make this selection either by
using the “cursor left” key to toggle
between all available configuration
sets until PP_GIS appears or you can
highlight the input field and press
ENTER. Then a list box comes up
showing all available sets:
Now use the cursor up or cursor
down key on the terminal to highlight
the PP_GIS line. Then press ENTER
or F1 CONT.
You can now enter a name for a new
job; press ENTER upon completing
the input of the name. Input fields for
description and creator are optional
and can be left blank.
As an example we can create a new
job called “Test”:
Step 3: Choosing your codelist
(DATA COLL \ Begin)
A codelist is simply a list of codes or
features. Codes are the building
blocks of the codelist and may be
thought of as features.
Codelists are selected as follows: first
use the cursor down key to get this
input field highlighted. Then use the
cursor left key to toggle among the
several options until the correct one
appears. Alternatively you can press
the ENTER key to get a listbox from
which the choice can be made, or a
new codelist can be created.
Please note that you must select a
codelist in order to collect data.
QuickStart Tutorial - GIS Data Collection, continued
Getting started with the new GIS equipment