Leica Geosystems GPS System 500 Equipment - User Manual - Manual (Page 39)

39
GPS Equipment User Manual - 4.0.0en
Getting started with the new Survey equipment
Creating a new codelist
From the codelist menu box, press F2
NEW to create a new codelist name.
The following panel appears.
As an example, we will create a
codelist called ‘Electric’. Enter the
word Electric in the Name input field
and press ENTER. Press F1 CONT
to return to the codelist menu box.
The Electric codelist now appears in
the menu box. Make sure the Electric
codelist is highlighted, and press
ENTER.
Step 4: Choosing your antenna
type
(DATA COLL \ Begin)
Finally you have to select the antenna
setup which you are using. For L1
post processing, this will normally be
the AT501. For real time differential, it
will normally be the RT combined
antenna and for L1 + L2 post
processing it will be the AT502
antenna. In this example, the selec-
tion indicates the RT combined.
This selection is made in the usual
way: first use the cursor down key to
get this input field highlighted. Then
use the cursor left key to toggle
among the several options until the
correct one appears. Alternatively you
can press the ENTER key to get a
listbox from which the choice can be
made.
Now all required settings for a typical
data collection session are made.
The Data Coll \ Begin panel looks the
following:
QuickStart Tutorial - GIS Data Collection, continued
Getting started with the new GIS equipment