Leica Geosystems TPS1100 Professional Series - Reference Manual - Manual (Page 72)

72
TPS1100 - Appl. Prog. Ref. Manual 2.2.0en Reference Line
Line and Offset
Enter L&O values
Line and Offset is started from the
"Define Reference Line/Arc" dialog.
Points with known offset values from
the reference can be staked out with
this function.
1
100pr86
Line +
Reference Line
∆ Line+
Offset +
∆ Offset-
REFL\ Line & Offset
Enter offsets from Ref. Line
Point Id
: 14
Offset : 1.555 m
Line : 2.878 m
Elev. : 100.001 m
CONT DONE
MC
QUIT
Point Id
Point number of the point to be
staked.
Offset
Perpendicular offset of the point to be
staked.
Offset +: to the right of the reference
Offset - : to the left of the reference.
Line (or Arc)
Line offset from first point, along
reference.
Line +: in the direction of the line.
Line - : in the opposite direction of the
line.
DesignElev
Elevation of the point to be staked.
Continue to "L&O Results"
dialog.
If instrument is in LOCK-
mode with EDM-mode TRK/
RTRK, distance measurement is
started.
Return to "Define Reference
Line" dialog.
Exit the program.