Panasonic PV-4611 - Manual (Page 18)

L I '' Iggf Your Tapes (Dubbing)
Connections you’ll need to make.
Playing (Source) VCR Recording (Editing) VCR TV for Monitoring
© Insert a pre-recorded
tape
into the Playing
(Source) VCR.
@ Insert a blank tape
with record tab into the
Recording (Editing) VCR.
To Monitor the Re-Recording
1 Turn the TV on and select its VCR channel
{CH3 or CH4) on the Recording VCR.
2 Set the VCR/TV selector on the Recording
VCR to the “VCR" position.
Selecting the Input Mode
Select Input “LINE” on the
Recording (Editing) VCR.
(See "Selecting the
Input Mode" at right.)
Push PLAY on Playing VCR.
Push PAUSE at the point you
want to start copying.
Push REC and PLAY at
V О у same time on Recordina
Iba
Vvysame time on Recording VCR.
Push PAUSE immediately.
2 Push MENU to display the
menu.
2 Rotate and push the Wheel
to select “SET UP VCR".
3 Rotate the Wheel to select
“INPUT SELECr, and
then push to choose
TUNER or LINE.
• You can also select “LINE”
using the VCR CH A/T
buttons. The numbers will
change in the order shown.
C -*-1 -
LINE-
1 — 2 — 3 '
........................... MENU.....................................
SET UP CHANNEL
IО t ОМА/ LANGUE; ENGL 1SH
SELECT
SET
END
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
.................. SET UP VCR ..................................
REPEAT PLAY
BEEPER
ON
ON
LINE
SELECT
SET
END
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
(CATV) (TV)
— 125 or 69 D
Push PAUSE on both
VCRs (at the same time),
to begin copying.
Edit Out Unwanted Parts
of the original recording by using the PAUSE button (on the
Recording unit) while copying is in progress.
@ Push STOP on both
VCRs to stop copying.
18
cs e a •
• When LINE is selected, “L” is-- *
displayed in the Multi Function
Display for about 4 seconds.
; N
C a u tio n :
Unauthorized exchanging and/or copying of copyrighted
recordings may be copyright infringement.