Between antenna and vcr between vcr and tv – Panasonic PV-4611 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Between Antenna and VCR
Between VCR and TV
Case 1: Twin Lead Cable Only
To VCR Terminal
--------------------
s
¿ah
—
SI
_Q
(Flat) Twin Lead 300
300-75 ohm Transformer
Ohm Cable
(not supplied)
Case 1: Screw & Plug Type Terminal
UHFA/HF Band Separator
(not supplied)
^
—<B5iÍ¡y
\UHF
RF Coaxial Cable
Case 2: Twin Lead & Coaxial Cabies
Case 2: Screw Type Terminal
(Round) 75 Ohm
coaxial Cable
UHFA/HF
Band Mixer
(not supplied)
D
To VCR Terminal
Case 3: Two Twin Lead Cables
If your TV has both post and screw-type VHF
terminals, using the post connection is
recommended to minimize signal loss.
TV
UHF/VHF Band Separator
(not supplied)
Case 3: Double Screw Type Terminal
TV
VHF
UHF
Case 4: Complex TV Terminal
TERMINALS ON BACK OF TV SET
Connect to one of the ANT terminals and select
the same antenna number on the TV.