Panasonic ULTRA-PRO MC-V150 - Manual (Page 13)

.
i CHANGING THE DUST BAG
Always operate the vacuum with a genuine Panasonic Type U3 Standard or U6
Electrostatic dust bag installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer. An optional cloth bag Is available.
1. Squeeze the
dust cover
release located
on the top back oi
the bag cover.
Pull the bag
cover forward.
Remove and lay
aside.
2. To remove the dust
bag, grasp the card­
board portion of the
dust bag and pull it
out.
3. Spread out the end
of the new dust bag.
NOTE:
Pull carefully so
as not to tear the bag at
the folds.
-
r
■
1 11
■
□ o
CX]
CX)
4.
Attach the new dust bag
onto the bag holder by holding
the cardboard portion and
pushing back as iilustrated.
S. Reinsert the tab provided
on the end of the dust cover
into the groove on the dust
compartment to allow the
cover to rotate closed.
NOTE:
The dust cover
must be completely
and correctly
installed for
proper opera­
tion.
Groove
6. Rotate the dust cover up
into the closed position and
press into place.
NOTE:
The dust
bag should
not be
caught
between the
lower edge of
the dust cover
and the gasket as
indicated by the
arrow in the
illustration.
- 1 3 -