Panasonic ULTRA-PRO MC-V150 - Manual (Page 7)

TO ASSEMBLE CLEANER
A
WARNING
Electiicst Shock Hazard.
DO NOT pfug into electrical supply until assembly Is complete. Failure to do so could
result in electrical shock or injury.
fawach № g 1A ì 3U eto ; v A
The vacuum cleaner main body and handle are packed separately.
Handle
Hole
Screw
1. The handle screw
has been installed for
shipping purposes.
Please remove the screw
before inserting the han­
dle. Insert the handle as
shown in the illustration. Ensure
that the cord hook is on the back
side of the handie before insert­
ing.
2. Insert the screw that
you have removed. Be
sure the screw is
tightened, but not
overtightened.
3. There is a recessed area between
the cord hook base and the handle
that is designed to secure the power
cord during vacuuming.
Always push the power cord down
into this recessed area to heip
keep the power cord from
hanging near the nozzle and
being damaged by the agita­
tor. Power
Cord -
A. Loosely wrap the power cord
around the cord hook. Secure the
plug head to the cord by push­
ing the power cord into the
retainer on the plug head.
Place the cord
wrap around the
(Plug Head)
bottom loop of
the cord. Cord №rap
- 7 -