Vcr and cassette information, Erase protection (record tab), Maximum record/playback time – Panasonic PV-7451 User Manual

Page 5: Reset all vcr memory functions, D.s.t. (daylight saving time), Spring (first sunday in april), Autumn (last sunday in october), Head cleaning, Specifications, Head clog sensor

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

VCR and Cassette Information

Erase Protection (Record Tab)

Cassettes have a record tab to ensure that

recordings are not accidentally erased.

To prevent accidental

erasure, break off the tab

with a screwdriver!

To record again, cover the

hole with cellophane tape. (

_

Maximum Record/Playback Time

Only use tapes with the lyB^mark in this unit.

Tape Speed
Setting

Type of Video Cassette

T60

T120

T160

SP

(Standard Play)

1 Hour

2 Hours

2 Hours

40 Minutes

LP
(Long Play)

2 Hours

4 Hours

5 Hours

20 Minutes

SLP
(Super Long Play)

3 Hours

6 Hours

8 Hours

Reset all VCR Memory Functions

Use when moving the VCR to a new location, or if a mistake

was made in the One Time VCR Setup section.

• Make sure a tape is not inserted in the VCR.

1) Turn VCR Power on.

2) Push and hold both PLAY and CH A buttons on the VCR

for more than 5 seconds.

• The power will shut off.

3) Perform the One Time VCR Setup section on page 12.

D.S.T. (Daylight Saving Time)

Spring (First Sunday in April)

When the VCR is set to DST:ON, it automatically adds
one hour and adjusts the clock;

NORMAL TIME

1:00 a.m. 2:00^a.m.

DAYLIGHT

SAVING TIME

3:00 a.m. 4:00 a.m.

Autumn (Last Sunday in October)

When the VCR is set to DST;ON, it automatically turns back
one hour and adjusts the dock.

DAYLIGHT

SAVING TIME

1:00 a.m. 2:00 a.m.

I

NORMAL TIME

1:00 a.m. 2:00 a.m.

Head Cleaning

Specifications

Your VCR will not normally require head cleaning,

however the heads may become clogged when playing

an old or damaged tape.

Head Clog Sensor _____________________

If head cleaning becomes
necessary, the VCR will

display the screen at right

while playing back a
recorded signal.

To exit this screen, push PLAY
on the remote control or VCR,

* Use “dry” type head cleaning cassette* only.

* Be sure to follow the cleaning tape instructions

carefully. Excessive use of a cleaning cassette can

shorten head life.

* If using a head cleaning cassette does not solve the

problem, contact your nearest Factory Service Center

or authorized Service Center.

* Cleaning cassette part No. NV-TCL30PT is

recommended.

VIDEO HEADS MAY

NEED CUBANING

PLEASE INSERT HEAD

CLEANING CASSETTE

OR REFER TO MANUAL

END:PLAY KEY

Power Source:

Power Consumption:

Video Signal;

Video Recording System

Audio Track:

Tuner:

Broadcast Channels:

CATV Channels:

Operating Temperature:

Operating Humidity:

Weight:

Dimensions:

120V AC, 60 Hz

Approx. 23 watts (Power on)
Approx. 7 watts (Power off)

EIA Standard NTSC color

: 4 rotary heads helical

scanning system

1 track (Normal)

2 channel (Hi-Fi Audio Sound)

VHP 2-13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)

Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)

Special CATV channel 5A (01)

Ultraband 65-94,100-125

4rF-104“F (5°C-40X)

10%-75%

7.5 lbs. (3.4 kg)

14-15/16” (W)x 3-2/3” (H)x

11-13/16” (D)

380 (W)x93 (H)x 300(D) mm

Note: Designs and specifications are subject to change

without notice.

Advertising