Between antenna and vcr between vcr and tv – Panasonic PV-7451 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Between Antenna and VCR
Between VCR and TV
Case 1: Twin Lead Cable Only
To VCR Terminal
(Fiat) Twin Lead 300
300-75 ohm Transformer
Ohm Cable
{not supplied)
Case 2: Twin Lead & Coaxial Cables
Case 3: Two Twin Lead Cables
If your TV has both post and plug-type VHF
terminals, the post connection is recommended
to minimize signal loss.
Case 1: Screw & Plug Type Terminal
UHFA/HF Band Separator
(not supplied)
VHF
RF Coaxial Cable
Case 2: Screw Type Terminal
TV
UHF
UHFA/HF Band Separator
(not supplied)
^ B
Case 3: Double Screw Type Terminal
TV
VHF
UHF
Case 4: Complex TV Terminal
TERMINALS ON BACK OF TV SET
Connect to one of the ANT terminals and select
the same antenna number on the TV.