Panasonic TU-DST51 - Manual (Page 52)

S pecial F eatures
programming Available Channels
You must perform the automatic channel programming before manually adding and
deleting channels because of the digital tuning system used by the STB. This method
will ensure that every available channel will be captured and stored into memory.
Automatic Channel Programming
The STB will scan for all available channels and store them in memory. The scan will
normally take several minutes to complete.
Procedure
O In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store all
channels with a signal,
n Press the ^ arrow to select AUTO.
□
Press the ACTION button to start the auto scan.
n Press the ACTION button to cancel the auto scan or exit back to SET UP Menu after the
auto scan is complete.
□ Press the ^ arrow once to exit back to Roller Guide.
Note: As more digital channels become available in your area, the AUTO
feature must be selected to store the new digital channels into memory.
Manual Channel Programming
After programming all available channels, you can use the MANUAL feature to
selectively add or delete channels.
Procedure
□
In SET UP Menu, select PROGRAM to choose MANUAL to manually add or delete
channels.
□ Press the ^ arrow twice to select MANUAL.
O Press the ACTION button to edit channels.
* Use the A, T arrow buttons and numeric keypad to select a channel.
• Use the ^ and ► arrow buttons to delete or add channels.
□ Press the ACTION button to exit back to SET UP Menu.
□ Press the ^ arrow once to exit back to Roller Guide.
i№m
AUTO MANUAL
The AUTO feature must be selected first to ensure that all
available channels are captured and stored into memory.