Mts broadcast/vhs hi-fi stereo system, Check list before you begin, Connections to make – Panasonic PV-V4520 User Manual
Page 24: Mts stereo and sap broadcast, Mts stereo broadcast, Sap broadcast, Mono broadcast, For model pv-v4520 only, Receivable broadcast types
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MTS Broadcast/VHS Hi-Fi Stereo System
1^1
Check list before you begin.
□ VCR is connected to a stereo TV, or a mono TV and an external
stereo amp or receiver with speakers.
□ VCR and other components are plugged in and turned on.
Connections to Make
For Model PV-V4520 only
AUDIO
To monitor recording in progress in stereo,
connect VCR to stereo TV or mono TV and
stereo amp with speakers.
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with an “([<” mark while the selected
audio mode is indicated with an arrow.
Display the broadcast signal being received.
Press DISPLAY.
MTS stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
both being received simultaneously.
Select STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and display
flickers, select MONO audio mode for
possibly better results.
SAP broadcast
Secondary Audio Program (sub language)
broadcast. Select SAP audio mode for the
sub language.
MONO broadcast
Normal monaural sound broadcast.
DISPLAY
STOP
STEREO
SAP
MONO
12:00AM ABC
0
:
00:00
SP
Equipped with dbx*-TV Noise Reduction
for true MTS reproduction. dbx*-TV
Noise Reduction is required for good
stereo separation and audio fidelity, dbx*
is a registered trademark, and is
licensed by dbx* Technology Licensing.
24
For assistance, call 1-800-211-PANA(7262).