Panasonic PV-V4520 - Manual (Page 27)

‘Important: If the remote control POWER, ACTION, PROGA/CR+, CHA/v, NUMBERED keys,
INPUT, SEARCH or ADD/DLT button does not work when pressed, press the
VCR button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON” is selected, picture is displayed even when broadcast
signal is weak or not present.
Display menu.
Press ACTION.*
2
MENU
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE:ENGLISH
VCR' S OUTPUT CH : 3
SELECT
SET
END :* V KEY
:► KEY
: ACTI ON KEY
Display SET UP CHANNEL
1) Press AT to
select.
2) Press ► to
display.
3
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT
SET
END
A T KEY
► KEY
ACTION KEY
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set.
ON -> Picture is displayed regardless of signal condition, and
may not always be clearly visible.
OFF --> Screen turns solid blue when signal is absent or weak.
If VCR is connected to equipment which has blue back feature,
selecting ON will have no effect on the other equipment.
Return to normal
screen.
Press ACTION twice.
Auto Shut-Off Feature
When “ON” is selected, VCR shuts itself off when playback of a
blank portion of tape continues or no signal (except when LINE is
selected) is detected for over 5 minutes.
Repeat step “a” and “b” on page 26 to
display SET UP VCR.
2
SELECT/
• SET
3
A:PLAY
,* T :STOP
b ► FF
1
ACTION
4
Ò
Model PV-V4520 remote is shown here.
b
SET UP VCR
----------
,
REPEAT PLAY OFF
REMOTE WARNING ON
lAUTO SHUT-OFF^^H ON
SELECT:* ▼ KEY
SET :► KEY
END : ACT ION KEY
______,
Set ON or OFF.
1) Press AT to
select.
2) Press ► to set.
Return to normal
screen.
Press ACTION twice.
27