Record on a tape, Insert a cassette, Select channel – Panasonic PV-V4520 User Manual
Page 9: Select recording speed, Start recording, I one touch recording, I record one program while watching another, Record using vcr controls, One touch recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Record On a Tape
•Important;
If the remote control POWER, ACTION, PROGA/CR+, CH
A/T,
NUMBERED keys, INPUT, SEARCH or ADD/DLTbutton does network when
pressed, press the VCR button on the remote and try the button again.
I^c
Check list before you begin.
D All connections are made.
D
TV is turned on and tuned to CH3 or 4 or Video.
Q Cassette record tab is in place.
□ Remote in VCR mode.
Insert a cassette.
VCR power comes on and “VCR”
appears on Multi Function Display.
2
rr> m n~)
QO CZ) GO
rr> rso
m
Oi
or
CH
I
Select Channel.
Press CH A / T* or NUMBERED keys.
• To select “LINE,” see page 11.
• To select channels over 100,
first press 100 key, then enter
remaining two digits.
3
SPEED
O
Select Recording speed.
(See page 30.)
Press SPEED.
• SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed on TV
screen and Multi Function Display.
4
REC
Start Recording.
Press REC.
After the VCR has been in Pause mode
for 5 minutes, it will stop automatically
to protect the tape and the video head.
This video recorder, equipped with the HQ (High
Quality) System, is compatible with existing VHS
equipment. Qnly use those tapes with the
IVHSI
mark. It is recommended that only cassette tapes
that have been tested and inspected for use in
2
,
4,
6
, and
8
hour VCR machines be used.
• To edit out unwanted portions,
press PAUSE/SLOW to pause
and to resume recording.
I To stop --> Press STOP.
I One Touch Recording
Press REC repeatedly to set the recording length
(30 min. ~ 4 hours).
• The VCR turns itself off at the preset time.
(
►Normal Rec—►0:30—►1:00'>.
4:00-«—3:00-«—2:00-4-1:30-4-^
I Record One Program While Watching Another
Press VCR/TV-> “VCR” disappears on Multi Function Display
--> Select Channel at the TV.
I
Selecting Channel at the VCR
(You cannot view
another channel during recording.)
Press VCR/TV-> “VCR” appears on Multi Function Display
--> Select Channel at the VCR (applies to connection b)
only. (See page 4)
^ Record using VCR controls
^
p Select
i Insert
A
Start
^ Channel.
' a cassette. ^ Recording.
VCR/TV
I
Press to stop.