Press power on the combination vcr, Select a channel, Nite mode – Panasonic PV M939 User Manual
Page 10: Set nite mode, Using the 100 key, Rapid tune, Audio mute, Phones, Self-demo mode, Tv operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TV Operation
1
Q)
Press POWER on the
Combination VCR.
08
ABC
Select a channel.
or
o © ©
o © ©
o ® ©
© ©
Using CH AT or
NUMBERED
keys.
3
NITE Mode
Color and picture intensity levels are adjusted so the screen is
easier on your eyes during night time use.
Set NITE mode.
Press NITE.
■ NITE mode may be selected
when watching TV, playing a
tape, or while in FM mode.
To Cancel, press NITE.
• Previous settings are restored.
• NITE mode is cancelled when power is
turned off or power failure occurs.
Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key, and then enter the
remaining two digits.
Rapid Tune
Press R-TUNE to display the last channel you were watching.
Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
Phones
Connect an earphone (not supplied) or headphones (not
supplied) to the Phones Jack.
SELF-DEMO Mode
With Power ON, hold down PLAY/REPEAT on the
Combination VCR for 5 seconds to display demo screen.
Repeat this to exit.
Q All connections are made (see page 6.)
Q Your Combination VCR is plugged in.
|\^Check list before you begin.
10
For assistance, call 1-800-211-PANA(7262)