Panasonic PV M939 - Manual (Page 30)

Special VCR Features (continued)
Weak Signal Display ON/OFF
When “ON” is selected, picture is displayed even when
broadcast signal is weak or nonexistent.
1
Display MAIN MENU.
Press ACTION.
2 Display SET UP CH
screen.
1) Press AV ◄ ►
to select “CH.”
2) Press ACTION
to display.
3 -- SET UP CHANNEL --
ANTENNA : CABLE
AUTO SET
SELECT:A ▼ KEY
SET :► KEY
END ; ACT I ON KEY
Select WEAK SIGNAL
DISPLAY.
1) Press
AT
to
select.
2) Press ► to set
“ON” or “OFF.”
• “ON" = Picture is displayed regardless of signal condition, and
may not always be clearly visible.
“OFF’ = Screen turns solid blue when signal is absent or weak.
• If Combination VCR is connected to equipment which has blue
back feature, selecting “ON” will have no effect on the other
equipment.
4 Return to normal screen.
Press ACTION twice.
VCR Lock
All operations are prohibited except Timer recording and tape
eject. Useful for families with small children.
To turn “ON.”
In stop mode, hold
down REC on the
Combination VCR
without a cassette for 7
seconds.
To turn “OFF.”
Repeat above with or
without a cassette.
• VCR Lock is cancelled automatically after 24 hours if clock is set.
• This feature cannot to be activated when POWER on the Combination
VCR is turned OFF (POWER indicator is not lit.)
2 SELECT/
SET
0 A;CHUP
T :CH DOWN
► ;VOL UP
< :VOL DOWN
1 ACTION
2
4
30
For assistance, call 1-800-211-PANA(7262)