To reset picture controls, End setup, Picture adjustment – Panasonic PV M939 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5
COLOR ................... I.......
TINT
I.......
BRIGHTNESS ........ I.......
PICTURE ......................... ^
SHARPNESS .........1.......
SELECT:
A T
KEY
SET :► KEY
END
:ACT I ON KEY
To Reset Picture
Controls
Press AT and ► to select
and set “NORMAL.”
All controls return to their
factory settings.
End setup.
Press ACTION three times
to exit.
Due to the earth’s magnetic fields, or magnetic charge build-up from
nearby electrical appliances, color distortion may occur if the
Combination VCR direction is changed while it is on. To avoid this,
position the Combination VCR before turning it on. If this
phenomenon does occur, press the POWER off and then on again.
Picture Adjustment
COLOR Control
Adjust color intensity.
TINT Control
Adjust for natural flesh tones.
BRIGHTNESS Control
Adjust picture brightness.
PICTURE Control
Adjust
picture
intensity
by
adjusting
both
contrast
and
color
level
in
the
proper balance.
SHARPNESS Control
Adjust picture sharpness.
11