Panasonic WJ-SQ508 - Manual (Page 3)

PREFACE
Panasonic introduces a totally new programmable
Sequential Switcher, WJ-SQ508, which can be used in
a Panasonic system 300 or in a stand alone system.
Using multiple (up to 8 ) units in a master/slave configuration,
the WJ-SQ508 8 -position Sequential Switcher will provide
switching of up to 64 cameras. It also provides remote
control capability, when used with the optional WV-CU300
System Controller. The WJ-SQ508 features two switching
modes.
In Mode 1, conventional sequential camera
switching is performed, white in Mode 2, each individual
camera’s dwell time can be programmed, between 0.5 and
30 seconds, using on-screen programming.
The WJ-SQ508 also includes an adjustable fast scanning
feature that can switch between 66.8 msec and 400.8 msec
per camera to a video recorder during an alarm condition.
This enables recording of pictures at a rate of nearly 13
cameras a second during an alarm. The WJ-SQ508 also
features a conventional alarm mode, in which sequential
switching is stopped, and an individual camera is linked to
the recorder and/or monitor. With on-screen programming,
a built-in alphanumeric titler allows easy superimposition
of a name or location for each camera, to simplify camera
site programming. The versatile WJ-SQ508 can be the
foundation of any growing surveillance system.
FEATURES
Provides two separate sequence dwell time modes;
Program Mode: Dwell time for each channel is
individually programmable
Normal Mode: Dwell time for all channels is the
same
Programmable of the switching order of the connected
cameras.
Password entry and on-screen menu for programming
and setup.
Twelve (12} character alphanumeric display for each
video input
Master/slave configuration with 8 units enables
expansion for systems use with up to 64 camera
locations
Two monitor output modes: Sequential/Alarm and
Sequential/Spot
Two alarm activation modes:
Mode 1: Quick Scan
Alarm activated internal switching, adjustable between
66.8 msec, and 400.8 msec, and EXT.
Mode 2; Spot Alarm
Conventional alarm activation
All functions of the WJ-SQ508, except for
programming, can be remotelly controlled by the
System Controller WV-CU300
PRECAUTIONS
Do not attempt to disassemble the instrument, In order
to prevent electric shock, do not remove screws or
covers. There are no user-seviceable parts inside. Do
refer all servicing to qualified service personnel.
Do not abuse the instrument. Avoid striking, shaking,
etc. It could be damaged by improper handing or
storage. Do handle the instrument with care.
Do not use strong or abrasive detergents when
cleaning the instrument body. Do use a dry cloth to
clean the instrument when dirty.ln case the dirt is hard
to remove, use mild detergent and wipe gently.
Do not expose the instrument to water or moisture, and
do not operate in wet area. Do take immediate action if
ever the instrument does become wet. Turn the power
off and refer servicing to qualified service personnel.
Moisture can damage the instrument and also create
the danger of electric shock.
All necessary procedures with regard to the installation
of this product should be made by qualified service
personnel or system installers.
Do not use the instrument in an extreme environment
where high temperature or high humidity exist. Use the
instrument under conditions where temperatures are
within 14°F-122°F (—10°C - +50°C), and humidity is
below 95’/i.
- 2 -