Panasonic PV C923 - Manual (Page 23)

TO SET DAILY/WEEKLY TIMER
When seifing the date in the step 4 on page 22, press the SET/
TRACKING " button repeatedly when the current day Is dis­
played.
The setting changes as follows:
Example
The current day (Friday) —> SUN-SAT
t
^
' MON-SAT
MON-FRi
I
WKL-THU
One mon№ later
minus one day
A
(Surrday to Saturday)
{Monday to Saturday)
(Monday to Friday)
WKL-WED
(Weekly Wednesday)
(Weekly Thursday)
TO CONFIRM THE SETTINGS
Press the PROGRAM button once. The TV screen displays
the timer program list. Press the PROGRAM button again.
The TV screen displays the ON/OFF TIMER setting.
(twice) (once)
-t—(-
. -
/ /\
• 23 TH 7:00PM 9:30Ft>t 007 SLf^
{+W£NT£RiCANCELiWENLI)
T imer
11;30M.i SET
<+WENTERiCAI^C£L(MENLJ)
Press the PROGRAM button until the normal screen is
appeared.
TO CANCEL A PROGRAM
Press the SET/TRACKING + or -
button to select the TIMER REC
SET option in the MENU, then
press the ENTER button.
Press the SET/TRACKING + or -
button to select the unnecessary
program, and press the CANCEL
button to cancel the program.
s \ \ t
—! I f
11 :i ::\:A
::::
(+J..iENTERffiANCEL/M£NU)
IF TH E PROGRAM OVERLAPS ANOTH ER
NOTE: Do not overlap programs as portions of the
conflicting programs will be lost. The first
recording time has priority over the next recording
time as shown In the diagram.
8:00 9:00 iO: 00 11 :00
Program i ™
Program 2
Program 3
Rocordirtg
Control Settings ■
Prog.1
• Deleteii Parls-
NdivReEWOBd Port’dh Paits
Prog .2_________ Prpg.3
NOTES: • The everyday/every week recording can be
made continuously until the recording is
canceled or the tape reaches the end.
• During timer recording, the automatic
rewinding mechanism does not function.
• You can correct or cancel the programmed
setting in program confirm mode.
USING THE REAL
iiiiiiiiiliMBi.....
IV1
The On-Screen Real Time Tape Counter shows the tape
running time in Hours, Minutes and Seconds.
You can easily determine how long the tape has been
running or how much time is left on the tape.
TO VIEW THE COUNTER DISPLAY
1 Press the DISPLAY button.
2 Press the COUNTER RESET
button to set the counter to
“00;00:00”.
3 Begin Playback or Recording to
start the tape, the counter will
display the elapsed time.
4 When you wish to make the
counter disappear, press the
DISPLAY button once again.
NOTES: If you rewind the tape from “00:00:00", a minus
sign (“-■) will be displayed in front of #ie time.
When you load a tape, the counter will reset to
“00:00; 00“,
The counter does not function on nonrecorded
(blank) sections of the tape. When you rewind,
fast forward or play tapes through blank
sections, the counter stops.
USING ZER0 SEARCH
The zero search function provides a convenient
method of rapidly returning to the starting point of
recording or playback. The starting point can be
indexed for any location on the tape by pressing the
COUNTER RESET button and ZERO SEARCH button.
1 Press the DISPLAY button.
2 Before playback or recording,
press the COUNTER RESET
button to set the counter to
“00:00:00".
3 Begin playback or recording.
4 Press the STOP button.
3:49AM THU CH012
9:00AM THU CH012
Press the ZERO SEARCH
f \
button. The tape will rewind 9:00AM THU CH012
and automatically stop at the
“00:00:00” position.
S
00:00;00 SP
23