Panasonic PV C923 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MOISTURE CONDENSATION

INSTALL THE TVA/CR IN YOUR CAR

DO NOT OPERATE ANY FUNCTIONS ON THIS UNIT
FOR AT LEAST TWO OR THREE HOURS WHEN
MOISTURE IN THE AIR CONDENSES ON IT. LET THE
UNIT STAND WITH POWER ON {SEE BELOW).

■ WHAT IS MOISTURE CONDENSATION?

When a cold liquid ia poured into a glass, for example,

water vapor in the air will condense on the surface of
the glass. This is called moisture condensation.

■ MOISTURE WILL CONDENSE ON THE UNIT IN

THE FOLLOWING CASES;

• When you move the unit from a cold to a warm place.
• After heating a cold room or under extremely humid

conditions-

■ WHEN YOU EXPERIENCE THE ABOVE CONDI­

TIONS,

"DEW" appears on the screen and all the function

buttons except the EJECT button (or the STOP/
EJECT button on the unit) are made non-operational

to protect the video heads. In this case, eject the
video cassette, leave the unit turned on and let it
remain at room temperature until moisture condensa­
tion disappears. Depending on the surrounding
conditions, this may take two or three hours.

• If you cause a static discharge when touching the unit,

and the unit fails to function, simply unplug the unit
from the wall outlet, wait 10 minutes and plug it back

in. The unit should return to normal operation.

• Avoid extreme heat or cold (41 “F/5°C-104“F/40“C).
• Do not place the unit on or near appliances which may

cause electromagnetic interference (e.g. speakers,
etc). Doing so may cause erratic operation of the unit

including picture and/or sound distortion or noise.

• Avoid extreme moisture and dust.
• The ventilation holes prevent overheating. Do not

block or cover these holes. Especially avoid covering

the holes with soft materials such as cloth or paper.

• Do not insert fingers or any other objects into the

cassette loading slot. Do not spray cleaner or wax
directly on the unit or use forced air to remove dust.

• Avoid places subject to strong vibration. Use in a

horizontal (flat) position only.

• Keep the unit away from flower vases, sinks, etc.

If liquids should be spilled into the unit, serious damage

will result. If you spill any liquids into the unit, unplug the
AC power cord immediately and consult qualified

service personnel before attempting to use it again.

• When you finish operating the unit, always unload the

cassette and turn off the power.

• When you leave your home for a long time, unplug the

AC power cord.

• To protect the unit from a lightning storm, unplug the

AC power cord from the wall outlet and disconnect the
antenna.

For a car equipped with air bags, be sure to follow the

manufacturer's instructions whenever performing any
electrical wiring work. Incorrect wiring can cause the air

bag system of a oar to malfunction.

Never cut the Insulation from the power supply lead in

an attempt to draw power for another device.

Doing so can overload the current capacity of the
lead, creating the danger of fire and electric shock.

For proper installation and wiring special technical
knowledge Is required. If you have any doubts about

where to position or how to install components,
contact the retailer where you purchased the product,
your automobile dealership, or an automotive service

provider. Note that you will be charged separately for
installation work.

Use all of the components that come with this product

only as directed- Improper use of components can
damage Interior components or result in improper
anchoring of components, which creates the danger of
accident and personal injury.

Improper Installation creates the danger of fire and

accident.

Take care so wires are not pinched between chassis

parts, by screws, or by the seat as it slides on its rails,

etc. Such conditions can cut wires and cause shorts,
creating the danger of accident, electric shock, and fire.

Avoid installation in areas subject to strong vibration
and areas where secure anchoring cannot be
achieved. Components Installed in such areas can
work loose, creating the danger of accident and

personal injury.

Never install the TV/VCR on the dashboard or In any

other location where it obstructs forward vision.

Never attach the stand to the roof of your car. Doing

so creates the danger of the TV/VCR falling down.

Never attach the stand to a sharply angled surface or to

a surface that causes the TV/VCR to face downwards.
Such Installation can cause the TV/VCR to fall.

Be sure to turn the ignition key of the car to the “OFF"
position before connecting or disconnecting wires and

cables. Failure to do so creates the danger of electric
shook and personal Injury.

Advertising