Panasonic nv-sj400 - Manual (Page 13)

Preparations for G-Code Programming
Identification numbers must be set for G-Code programming.
Proceed with the G-Code programming operation described
on page 24, and the identification numbers of the TV stations
concerned will be set automatically. This will allow G-Code
programming to be undertaken without performing the
operation described on this page. However, you can follow
the setting procedure described below if you wish to set the
identification numbers of all the TV stations prior to actual
programming.
“Identification numbers” refer to the numbers used for
identifying TV stations.
The programme position on the VCR receiving the TV station
are set in these identification numbers.
Have a newspaper or magazine which lists today’s local TV
station programmes and G-Code numbers on hand.
Preparations
• Set the clock of the VCR. See page 12.
• Store TV broadcasts in your VCR. See page 9-11.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
Operations
1
Press the MENU button © to
display the Main menu on the
TV screen. CLOCK UT
TVWn PflESCT
CH
40040ELm
Q-CODECK 8CT
SYSTEM
OPTION
2
Press the Cursor buttons ( A T ) ©
to select “G-CODE CH SET then
press the ENTER button LANGUAGE
CLOCK Srr
TUNEfl PRESET
CH AOOAOEUnE
Press the Cursor buttons ( A T ) ©
to select the identification number
(GUIDE CH) (001-255).
Press the Cursor buttons (■^ ►) ©
then press the Cursor buttons
(A ▼) ^ to select the programme
position (1-99, A1 or A2).
• To set the other TV stations, press
the Cursor buttons (◄ ►) © then
repeat steps 3-4.
Note:
• To receive satellite stations, the satellite receiver must be
connected on the VCR and programme position must be
set depending on the type of connection.
A1/A2:
When the satellite receiver is connected to the
AudioA/ideo input sockets (AV1/AV2).
When the satellite receiver is connected by mean of the RF
coaxial cable, set to a free programme position between 1
and 99.
Example:
(AUSTRALIA)
ABC 2 002
ATN 7 007
TCN 9 009
TEN 10 010
SBS 28 028/001
Example;
(NEW ZEALAND)
tV8M
TV ONE 001
CHANNEL 2 002
TV3 003
*SKYTV MGVIES 004
*SKYTV SPORTS 005
‘SKY TV NEWS 006
‘SKY ORANGE 007
‘SKY DISCOVERY&TRACKSIDE 008
CTV Oil
^Connection to the Sky decoder
When the Sky decoder is connected to the AudioVideo input
sockets:
Set to “AT or “A2".
When the Sky decoder is connected by means of the RF
coaxial cable:
Set to the programme position that the Sky decoder is
tuned to.
• When G-Code programming, turn on the Sky decoder and
select the desired Sky channel.
5
Press the MENU button © twice to exit the On Screen
Display.
13