Checking a timer programme, Cancelling atimer programme, Note – Panasonic nv-sj400 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking a Timer Programme
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press the PROG./CHECK button ® twice.
Press the MENU button © to
exit the On Screen Display.
Cancelling aTimer Programme
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
1 Press the PROG./CHECK button ©
twice.
Press the PROG./CHECK button ©
repeatedly until the desired timer
programme number flashes on and
off.
3 Press the CANCEL button
Press the MENU button © to
exit the On Screen Display.
Note:
• If timer recording is not completed {due to insufficient tape
or cancellation by the user), the programmed timer
recording data will be cancelled from the memory by
4 A.M the next day.
However, if the timer recording function is activated at that
time, the programmed timer recording data will not be
cancelled.
«0
.1
•«3
5
0)
o
o
c
§
'D
23