Ntsc playback, Note for only ntsc playback on pal system tv, Convenient automatic functions – Panasonic nv-sj400 User Manual

Page 18: Auto rewind, Notes, Example

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

NTSC Playback

Tapes recorded in the NTSC system can be played back with

this VCR via a RAL system TV.

• Select “NTSC PB SELECT" from the on screen display

according to the colour TV system of the TV. (See page 15.)

on PAL TV: For TVs that can receive PAL signals.
4.43:

For TVs that can receive NTSC 4.43 signals.

3.58:

For TVs that can receive NTSC 3.58 signals.

• NTSC 3.58 recording requires “NTSC INPUT SELECT to

be in the AUTO or 3.58 position (see page 15), however if
“NTSC INPUT SELECT is in this position when recording
a NTSC 3.58 signal, no colour is available for the PAL TV.
Once the recording is completed, you then need to select
“on PAL TV” to view the recording in colour on PAL TV.

When playback the PAL tapes;

You do not need to set “NTSC PB SELECT.

Note for only NTSC Playback on PAL system TV

This function is designed to allow only the playback of tapes

recorded by NTSC signals on a PAL system TV. The NTSC

signal is not completely converted to a PAL signal. For this
reason, images played back by this function cannot be
recorded correctly on other VCRs.

Convenient Automatic Functions

VCR Auto Power On
When you insert a video cassette, the VCR switches on

automatically.

Auto Playback Start
When you insert a video cassette with a broken erasure
prevention tab, playback start automatically without having to

press the Play button 0.

yCR-off Playback
When the VCR is off, an inserted cassette can be played
back by pressing the Play button 0.

Auto Rewind
When the tape reaches the end, the VCR automatically

rewinds it to the beginning.
• This function does not work during timer recording

and OTR.

Automatic Switching Off and Ejection
When the VCR is switched off, an inserted cassette can be
ejected simply by pressing the EJECT button 0. The VCR will
eject the cassette and automatically turn itself off again.

VCR-off Search
When the VCR is off, the VCR starts intro-jet scan of an

inserted cassette by pressing the SEARCH button O-

Notes;

• Audio reproduction of linear (conventionally recorded)

tapes will be monaural when played back on the FM Hi-Fi
video recorders.

« Cue, review or slow playback will be automatically

cancelled after 10 minutes, and still playback after 5
minutes.

• On some TVs, the playback picture may roll up or down;

adjust this using the V-HOLD control on the TV. TVs not

equipped with a V-HOLD control cannot correct this
condition. The playback picture may shrink vertically, and

black bars may appear both on the lop and bottom of the
screen. This does not indicate a malfunction.

• In Cue and Review playback, noise bars and distortions

may occur on the screen. However, this is not a
malfunction.

• During cue, review, still or slow playback, the picture may

not be in colour. Alternatively, the top of the TV screen may
be distorted.

• During playback function other than normal playback,

horizontal noise bars may appear in the picture, the colour

of the picture may be unstable, or the picture may be
otherwise distorted.

• When you play back a tape recorded in the LP mode, the

picture may be in black and white.

• When you play back a tape recorded in the EP mode, the

picture and the sound may be unstable.
However, these are not malfunctions.

• When playing back a tape which was recorded on another

VCR, it may be necessary to adjust tracking control. In
some cases the picture quality may still be inferior. This is
due to format constraints.

• Depending oh the TV set used, the playback picture may

roll up or down during special playback (Pause. Cue,
Review, or Stow playback mode). However, this is not an
indication of a malfunction.

To Play back in the Desired Picture Quality

(Picture Mode)

This function reproduces optimum playback picture from
various kind of recorded tapes and contents.

Press the PICTURE MODE button 0 and select the

corresponding Picture Mode as follows.

Example:

STANDARD

Normal

TV Programme recorded

DYNAMIC

Clear & Vivid

Scenery, Sports

SOFT

Mild

Rental soft tape

CARTOON

Delicate

Cartoon

• Pressing the PICTURE MODE button 0 once makes the

On Screen Display appear; after that, pressing it repeatedly
changes the indication in the following order:

STANDARD

_

(Initial Setting)

— CARTOON ^

DYNAMIC —

— SOFT<--------

Advertising