To set to the conditions for direct, Recording function – Panasonic nv-sj400 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For Reduced the VCR’s Power
Consumption When the VCR Is Switched
Off
Follow steps 1 to 2 of TAPE SELECT.
3 Press the Cursor buttons
( A T )
to select “POWER SAVE” then
select “ON" or "OFP by pressing *
the Cursor buttons (◄ ►)
On Screen Display
Ijjjlljygjjjjjygijjl
ON:
This setting makes the
display disappear when
the VCR is off.
It will not operate in the
Timer standby mode.
After recording all
programmed data, the
VCR will go into Power
save mode.
OFF: This setting does not conserve power when the
VCR is off.
4 Press the MENU button ^ twice to exit the On Screen
Display.
To Set to the Conditions for Direct
Recording Function
Follow steps 1 to 2 of TAPE SELECT.
3 Press the Cursor buttons
( A T ) ©
to select “DIRECT REC" then
select “ON” or “OFP by pressing
the Cursor buttons (-^ ►) ©.
OFF: Initially set at this position.
ON:
This setting enables
Direct Recording.
AV input (A1) becomes
exclusive channel for
Direct Recording.
(See page 20.)
4 Press the MENU button © twice to exit the On Screen
Display.
■*LTV
(OFF
(OFF