Connections you’ll need to make, Playing (source) vcr, Insert pre-recorded tape – Panasonic PV-840F User Manual
Page 19: Recording (editing) vcr, Insert blank tape with record tab, Select line mode, Put in standby mode, Start dubbing, Stop dubbing, To monitor dubbing on your tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Copying Your Tapes
(Dubbing)
Connections you’ll need to make.
AUDIO VIDEO
OUT <3-1
I N 1 0
O
-IN-EROM-ANT.
OUT TO TVi
-IN-FROM-ANT.
i
AUDIO VIDEO
0UT<3 O
IN 1 Q
Q
^
^
OUT TO TVi
VHP/
audio
in
UHF O
VIDEO IN
O
Playing (Source) VCR
Recording (Editing) VCR
TV for Monitoring
Playing (Source) VCR
Insert pre-recorded
tape.
Recording (Editing) VCR
Insert blank tape
with record tab.
2
INPUT
Select LINE mode.
Press INPUT.
(See “Selecting the
Input Mode” below.)
3
and
PAUSE
Put in Standby mode.
Press PLAY, then
PAUSE at starting point.
•Q)
and
O
BECTfiME
PAUSE
Put in Standby mode.
Press REC/TIME, then
PAUSE inn mediately.
4
PAUSE
Start dubbing.
Press PAUSE.
PAUSE
Start dubbing.
Press PAUSE.
5
STOP
Stop dubbing.
Press STOP.
Stop dubbing.
Press STOP.
To Monitor Dubbing on Your TV
1
Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2
Set the VCFl/ TV Selector on the Recording
VCR to “VCR."
Dubbing tapes protected with Copy Guard will have
poor quality results.
Selecting the Input Mode
Method 1: Press INPUT.
Channel Number <--> LINE
Method 2:Press CH A/T.
Display will change as below.
c
^^LINE-
(CABLE) (TV)
—►125 or 69
D
“L" lights in Multi-Function Display (about 4 sec.)
when LINE is selected.
^CautioTi: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright Infringement^
19