When vcr is turned on the first time, Turn the tv and vcr on, Tune to vcr output channel – Panasonic PV-840F User Manual
Page 6: Select the language, Start channel auto set and clock auto set, One time vcr setup, Process of setup, Select language, Channel/clock auto set
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
One Time VCR Setup
When VCR is turned on the first time,
setup mode is entered automatically.
Process of Setup
3
IlÉIjSgJïEQS
SGsiiiiM)
o
Turn the TV and VCR on.
Press POWER.
2
Tune to VCR output channel.
Tune TV to CH3 or CH4.
(Same as back of VCR)
Always tune TV to this channel to
monitor the VCR.
If
you
used
audio/video
jack
connection,
tune the
TV
to its video input.
SELECT LANGUAGE
PUSH VCR CH A: ENGLISH
OPRIMIR VCR CH T:ESPAÑOL
APP. VCR/TV : FRANÇAIS
Select the language.
for English
(TV Screen)
for Spanish
(ESPAÑOL)
for French
(FRANQAIS)
Use remote or VCR buttons.
If wrong language is set, do
“Reset all VCR Memory Functions"
steps on page 28.
4
CHANNEL/CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE I T TO YOUR
LOCAL PBS CH THEN, . .
PLEASE PUSH CH UP KEY
Start Channel Auto Set
and Clock Auto Set.
Press CH
A.
CH AUTO SET PROCEEDING
0
AUTO CLOCK SET
PROCEEDING
( Case 1 ] ^ (Setup completed)
1
POWER
3
VCR/TV
3CH AW
4
[ Case 2 ] V {Setup incomplete)
1/ 4/2000 TUE 12:00PM
OST:ON
SETTING : CH 02
END
AUTO CLOCK SET
COMPLETED
: PUSH CH UP KEY
Press CH
A
to exit.
• If your area observes
DST (daylight saving
time), but the time is
incorrect; do the
Time Zone Adjust"
steps on page 27.
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
See next
page.
For assistance, call 1-800-211-PANA{7262]