Panasonic PV-840F - Manual (Page 9)

Record On a Tape
*lmportant;
If the remote control POWER, ACTION,
PROG. CH
A/V, INDEX, NUMBERED
keys, INPUT,or ADD/DLT button does not
work when pressed, press the VCR button
on the remote and try the button again.
a"
Q All connections are made.
D TV is turned on and set to the VCR channel (CH 3 or 4).
□ Cassette with record tab in place.
Q Remote in VCR mode.
Insert a cassette.
• VCR power comes on
automatically.
Check list before you begin.
Select Channel.
Press CH A/V* or NUMBERED keys.
•To select “LINE", see page 19.
• To select channels over 100,
first press 100 key, then enter
remaining two digits.
Select Recording speed.
(See page 28.)
Press SPEED.
• SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed
on TV screen and VCR display.
Start Recording.
Press REC/TIME.
• To edit out unwanted portions,
press PAUSE to pause and
resume recording.
I To stop "> Press STOP.
I One Touch Recording
Press REC/TIME repeatedly to set the recording
length (30 min. - 4 hours).
• The VCR turns itself off at a preset time.
( ►Normal Rec—►0:30—►l:00-.v
4:00-*-3:00-*—2:00-^1:30
I Record One Program While Watching Another
Press VCR/TV--> “VCR” disappears on VCR display
--> Select Channel at the TV.
■ Selecting Channel at the VCR
Press VCR/TV"> “VCR” appears on VCR display
--> Select Channel at the VCR.
After the VCR has been in Pause mode
for 5 minutes, it will stop automatically
to protect the tape and the video head.