Panasonic PV-840F - Manual (Page 21)

Important: If the remote control POWER, ACTION, PROG, CHA/T, INDEX, NUMBERED keys, INPUT, or
ADD/DLT button does not work when pressed, press the VCR button on the remote and try the
button again.
Manual Caption
1
Do “Preset Caption” steps 1--3 on page 20.
2
CHANNEL CAPTION —
PRESET CAPTION
MANUAL CAPTIO
SELECT:* ▼ KEY
SET :► KEY
END : ACTI ON KEY
Display MANUAL CAPTION.
1) Press AT to
select.
2) Press ► to
display.
3
4
------- MANUAL CAPTION ----------
CH NUMBER CAPTION
ES -----
SELECT:* ▼ KEY
SET :► KEY
END :ACT I ON KEY
Select channel number.
1) Press AT to
select CH
NUMBER.
2) Press ► to
move cursor to
the right.
Channels already set and
channels deleted from Channel
Memory are not displayed.
You can set a total of ten
channel captions.
------- MANUAL CAPTION ----------
CH NUMBER CAPTION
02 a---
CLEAR :A0D/DLT KEY
SELECT:* ▼ KEY
SET
k KEY
Enter CAPTION.
1) Press AT to
select.
2) Press ► to enter.
• Characters change in
following order.
CT
A**B**C" - BLANK*-* —
------------------►g^—.»^2**1**0**/**l
3) Press M to set.
• Repeat steps 3 and 4 as desired.
To make corrections,
Press ► to move to the incorrect entry, then press AT to
make correction. Or, press ADD/DLT to clear the caption.
o ©
0 0©
© © ©
A£On.T
0 0
^
VOL CH
vcEDCotiinoiamr
^ S Q
SELECT/
SET
A:PLAY
T :STOP
◄ :REW
5 ACTION
ADD/ DLT
End input.
Press ACTION four times.
21