Haybacj^^kpe, Insert a cassette – Panasonic PV-8665S User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Haybacj^^kpe
Check list before you begin.
d All connections are made.
(See pages 6-9.)
□ TV and VCR are plugged in.
□ TV is turned on and set to the VCR
channel (CH3or4).
Caution:
Please inspect your cassette tapes
and remove any loose or peeling
labels to prevent them from
becoming jammed in your unit.
1
Insert a cassette.
• VCR power comes on automatically.
• “VCR" lights in the Multi Function Display.
2
Press PLAY
on the remote or VCR to start playback.
• Playback begins automatically if cassette has no record tab.
3
Press STOP
on the remote or VCR to stop playback.
• To rewind the tape, press REW.
4
Press
EJECT on the remote or VCR to eject the
cassette.
• You may eject a cassette with power on or off.
To Find a Particular Scene During Playback
Press
REW
or
FF during playback to search for a scene.
• Search speed for SP mode tapes is 7 times and SLP mode tapes is
21 times the normal speed.
• Some noise bars will appear during search.
Special Effects During Playback
These features work best in SP or SLP mode. The sound will be muted.
Slow Motion Playback
Press SLOW to start slow motion playback during playback.
Press PLAY or SLOW to release.
Still (Freeze^ Frame Picture
Press PAUSE to freeze and release the picture.
• To reduce picture noise, first press SLOW. Then, use CH
(TRACKING) A/T to clear up the picture. Now, press PAUSE.
Frame bv Frame Advance
In Still mode, hold down SLOW to advance the still picture one
frame at a time. Press PAUSE to release.
Features for a Quality Picture
Digital Auto Picture
This feature automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control fto reduce picture noise)
Use during Playback and Slow Motion mode to reduce picture
noise. Press CH (TRACKING)
A/T
during playback until the
picture clears up. To return to Auto Tracking mode, press
POWER off and then on again.
V-Lock Control (to reduce picture jitter^
In Still mode, CH (TRACKING)
A/T
operate as a
V-Lock control. Press
A/T
until the picture is stabilized.
After the VCR is in Still or Slow mode for 3 rrtinutes, it
vrill switch to the Stop mode automatically to protect the
tape and the video head.
19