Panasonic PV-8665S - Manual (Page 33)

With the proper audio mode setting, your VCR can:
1) record and playback an MTS stereo broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural broadcast (main language) or Secondary Audio Program (sub language)
on the Hi-Fi tracks for better quality monaura! sound.
3) playback non Hi-Fi tapes in monaural.
• When recording, the selected broadcast sound is always recorded on the left and right Hi-Fi tracks as well as
the normal monaural track. This means your tapes can be played back on Hi-Fi as well as non-Hi-Fi VCRs.
1
b
O © ©
© © 0
©00
ADOOLT
© 0 ®
COUMlEAfCSET CH8PUV
Oi
o
-o
SiCL I
Q q !
Audio Mode for Recording
1
Press SAP/Hi-Fi repeatedly
(each press within 5 seconds)
to select the desired audio mode
(STEREO, SAP, or MONO).
• Please refer to the “Receivable
Broadcast Types" section on page 32.
#STEREO
*SAP t
MONO
The arrow indicates
your selection.
2
Do a recording.
See the “Record On a Tape” section on page 20.
Audio Mode for Playback
a Playback the tape.
See the “Playback a Tape” section on page 19.
b Press SAP/Hi-Fi repeatedly
(each press within 5 seconds)
to select the desired audio
mode (HIFI or NORMAL).
• Select "HIFI” to listen to your stereo
recordings with stereo sound, or
“NORMAL" for monaural sound.
• The arrow indicates
your selection.
When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo will
play back with true stereo sound. Standard stereo tapes will play back with monaural sound.
In order to listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo
TV or an external stereo amp and speakers. (See page 32.)
When adjusting the tracking during playback, the Hi-Fi audio sound may revert to normal audio sound.
This is normal.
There may be a difference In audio level between Hi-Fi and normal audio playback.
33