Panasonic PV-8665S - Manual (Page 23)

POWER
Cancel a Timer Recording:
(Recording is in progress)
Press POWER and then STOP within 10 seconds to
cancel the timer recording.
• The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress)
1 Press PROG to display the “SET
PROGRAM” screen.
2 Press AT to select “TIMER
PROGRAM," and then press ► to
display all currently set programs.
3 Press AT and ► to select and
set a program number.
(See page 22.)
4 Press AT and to select
and set replacement timer
information.
5 Press PROG twice to exit this mode.
--------- SET PHOGHAM----------
VCR Pha4 PBQGBAM
P DT START STOP CH SPO Q------;------------ „ __
2 8 10:OOP12:OOP125 SP
3 10 8:00P 9:OOP 10 SP
4 SU 9;OOP10:OOP L LP
SELECT 1-8: a ▼ KEY
ENTER :► KEY
END :PRCX3 KEY
Bfcrel/ START STOP CR
CATEGORY:SPORTS
SELECT:A Y KEY
SET :4 ► KEY
END : PROG KEY
Review or Clear Program Contents:
(Recording is not in progress)
1 Press PROG to display the “SET
PROGRAM" screen.
2 Press AT to select “TIMER
PROGRAM,” and then press ► to
display all currently set programs.
3 Press AT to select a program
number.,
4 Press ADD/DLT if you want
to clear the program.
5 Press PROG to exit this mode.
SET PROGRAM
P DT START STOP CH SPO
2 8 1O;OOP12:O0P125 SP
3 10 8;00P 9:00P 10 SP
4 SU 9;00P10:00P L LP
CANCEL:ADD/DLT KEY
SELECT 1-8:A ▼ KEY
ENTER KEY
END :PR0Q KEY
P DT START STOP CH SPO
a----------:--------
2 B 10:00P12:0OP125 SP
3 10 8:00P 9:00P 10 SP
4 SU 9:00P10:00P L LP
SELECT 1-B: a y KEY
ENTER :► KEY
END :PR0Q KEY
À SELECT V
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not inserted in the VCR.)
1 Hold down STOP/EJECT and press REW to enter the Program mode.
2 Press FF or REC/TIME repeatedly or hold down to make selections.
3 Press PLAY to set the item and move on.
• To make corrections, repeatedly press PLAY to move the cursor to the right,
or REW to move to the left to the incorrect entry and make the correction,
4 Press STOP/EJECT and REW together to display program contents
after all items have been entered.
• You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT arid press REW, (release REW first, and
then release STOP/EJECT) to exit this mode.
6 Insert a cassette with record tab and press POWER off to set the timer.
23