Panasonic OMNIVISION VHS PV-7662 - Manual (Page 14)

One Time
VCR
Setup
(continued)
When the VCR power is first turned on, the
language select screen appears automatically.
Follow along in the manual as you guided are
through the setup procedure on the screen.
I^^^heck list before you begin.
□ All TV and VCR connections are made.
(See pages 6-9.)
Using keys
Whenever a menu or ^
program screen is displayed,
the PLAY, STOP. REWIND,
and FF buttons on the remote
control function as
AT A ► only.
For play, stop, rewind, and fast forward
functions, use the buttons on the VCR.
On Screen Language, Cable/ DSS
Receiver Setup, Channels Memory,
and Auto Clock
POWER Turn TV and VCR on.
Tune TV to VCR output channel (the same one
you set on the back of the VCR: CH3 or CH4).
or
y
or
VCFVTV
Push CH A for
English on-screen
displays.
Push CH T for
Spanish on-screen
displays.
Push V C H f r y for
French on-screen
displays.
SELECT UNGUAGE
PUSH VCR CH a : ENGLISH
PULSE VCR CH T; ESPAÑOL
APP. VCR/TV : FRANÇAIS
If wrong language
is set, see the
“Reset all VCR
Memory Functions"
section on page 5.
You can also set the language using the buttons on the VCR.
The VCR should be connected to an antenna or
cable box (page 6'-9).
<<§>)►
Push AT to select
your hookup, and
then push ► to set.
(Refer to page 12.)
• If you selected CABLE/
DSS BOX^VCR^TV,
continue with step 5.
If not, go to Alternate
Instructions on page 16.
SELECT HOOKUP
CABLE/DSS BOX^VCH»-TV
VCF>CABLE/DSS BOX^TV
VCR^TV
SELECT; A T KEY
SET > KEY
EHO :MENU KEY
Push AT to select
your cable box or
DSS receiver output
channel number, and
then push ► to enter.
• If necessary, refer to your _______________________
cable box manual.
• If both a cable box and DSS receiver are used,
set the output channel of the DSS receiver.
• If you are using Audio/Video jack connections
to your cable box, select and set “VIDEO OUT"
as the output channel.
SELECT HOOKUP
CABLE/DSS BOX^VCR^TV
CABLE/DSS BOX OUTPUT CH
SELECT;^ T KEY
SET
► KEY
END ;MENU KEY
ENTER CODE NUMBER
REFERRING TO MANUAL
Push
AT
to select
your cable box or DSS
receiver code number,
and then push ► to
enter. (Refer to the list
on page 13.)
• If your cable box or DSS receiver doesn’t
have a remote control, select “NO REMOTE."
Then, go to Alternate Instructions on page 16.
• This determines whether the VCR will control
your cable box or DSS receiver.
SELECT;A t key
SET :► KEY
END ;MENU KEY
14