Panasonic OMNIVISION VHS PV-7662 - Manual (Page 15)

If you use a cable box,
tune it to channel 02.
If you use a DSS receiver,
tune it to channel 270.
A Push ► to continue.
•“NOW TRANSMITTING"
appears.
If Cable Box
PLEASE TUNE YOUR CABLE
BOX TO CH02.
If DSS Receiver
PLEASE TUNE YOUR DSS
RECEIVER TO CH 270.
PROCEED:► KEY
END rMENU KEY
Push
AT
to select
“YES” or “NO,” and
then push ► to enter.
If Cable Box
IS YOUR CABLE BOX
RECEIVING CH 09 ?
ПЭН
NO
If DSS Receiver
If you use a cable box
and selected “YES,”
go to step 9.
If you use a DSS receiver
and selected “YES," go to
the Alternate Instructions
on page 16.
If you selected “NO,"
the screen in step 6 on
page 14 will reappear.
Try entering a different code
assigned to your brand and/ or repositioning
the equipment (see page 13).
If the answer is still “NO," cable box or DSS
receiver control is not available.
Push MENU and go to the Alternate
Instructions on page 16.
IS YOUR DSS RECEIVER
RECEIVING CH 200?
NO
SELECT:* ▼ KEY
SET :► KEY
END :MENU KEY
Confirm that your cable box is on and
that your DSS receiver is off.
Push
AT
to select
your local PBS channel
number you receive on
your cable box, and
then push ► to display
the “CLOCK AUTO
SET” screen.
PLEASE ENTER YOUR LOCAL
PBS CHANNEL ON CABLE BOX
SELECT:* » KEY
SET :► KEY
END :MENU KEY
CH
n
Push CH
A
to start
Auto Clock Set.
• If you live near a different time
zone, be sure to enter the PBS
channel in your time zone.
• “AUTO CLOCK SET
PROCEEDING" appears.
CLOCK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX,TUNE IT TO YOUR
LOCAL PBS CH THEN.. .
PLEASE PUSH CH UP KEY
If the Auto Clock Set
displayed time is incorrect.
If you use a cable box and
receive more than one PBS
station, try auto clock set again.
Follow the Set or Reset Auto
Clock Set section on page 17
and when the instructions call for
you to enter a PBS station, enter
the one you have not tried yet.
If “AUTO CLOCK SET
INCOMPLETE” appears...
The screen below will appear
on-screen if auto clock set data
is not available in your area.
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
Push MENU to display the
manual clock set screen.
(See the Manual Clock Set
section on page 16.)
Note:
If you use a cable box and
receive more than one PBS
station, you may exit the manual
clock set screen and try auto
clock set again.
Follow the Set or Reset Auto
Clock Set section on page 17 and
when the instructions call for you
to enter a PBS station, enter the
one you have not tried yet.
This display appears when
auto clock set is completed.
Confirm that the time is
correct and push CH
A
to exit.
7/25/1997 FRI 12;00PH
DST:0N
SETTING : CH02
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
Auto clock set will be performed when the VCR is turned off the first time each day. If you use a cable
box and you want auto clock set to be performed, the cable box must be left on and tuned to the PBS
channel before the VCR power is turned off.
15