One time vcr setup (continued), Alternate instructions, Manual clock set – Panasonic OMNIVISION VHS PV-7662 User Manual

Page 16: Ubmaiba, One time, Setup, Continued)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

One Time

VCR

Setup

(continued)

Alternate Instructions

Complete the following steps if, any of the following
applies:

A You selected connection method

2

(VCR^CABLE/

DSS BOX^TV or VCR^TV ) in step 4 on page 14.

B

You selected “NO REMOTE” in step 6 on page 14

(your cable box or DSS receiver is not remote
controllable).

C You use a DSS receiver and selected “YES” in

step 8 on page 15.

D

Cable Box or DSS receiver could not be controlled

in step 8 on page 15.

Turn on the cable box and set

it to the local PBS channel.

• If you live near a different time

zone, make sure to set the

channel in your time zone.

• If you use a DSS receiver,

it must be turned off.

CHANNEL/CLOCK AUTO SET

CONNECT ANTENNA CABLE

AND IF YOU USE A CABLE
BOX,TUNE IT TO YOUR

LOCAL PBS CH THEN. . .

PLEASE PUSH CH UP KEY

CH

ifl

Push CH

A

to start Channel

Auto Set and Auto Clock Set.

• The following messages appear.

“CH AUTO SET PROCEEDING"
“AUTO CLOCK SET PROCEEDING"

This screen appears to confirm
that auto clock set is completed.

Confirm that the

time is correct and

push CH

A

to exit

this screen.

If this screen appears,

auto clock set is not
available in your area.

Please set the clock

manually as described

at right.

7/25/1997 FRI 12:00PM

DST;ON

SETTING : CH02

AUTO CLOCK SET

COMPLETED

END : PUSH CH UP KEY

AUTO CLOCK SET

IS INCOMPLETE

PUSH MENU TO SET CLOCK

If the displayed auto clock set time and

D.S.T. are not correct

If you live close to two different time zones, the VCR may

recognize the wrong PBS station as the setting channel.

If this happens, please complete the following steps.

1

Make a note of the SETTING: CH number shown on screen

and push CH

A

to exit.

2

Delete the setting channel form channel memory.

{See the Add or Delete a Channel section on page 17.)

3

Push MENU to display the menu.

4

Push

AT

to select “SET CLOCK," and then push ►

to display the “SET CLOCK” screen.

5

Push

AT

and ► to select and set “AUTO SET.”

6

Follow the One Time VCR Setup instructions on pages 14-16.

• If you use a cable box and have multiple PBS stations, tune the

cable box to a different PBS station and try auto clock set again

using the menu.

Manual Clock Set

(In case Auto Clock Set could

not be performed)

SET CLOCK...............

UBmaiBa

......

SELECT:A Y KEY
SET ;► KEY
END :MENU KEY___________

See page 5 for DST.

1

Push MENU to

display the SET

CLOCK screen.

2

Push

AT

and

4

to select and set
the month, date,

year, time, and

D.S.T. (Daylight

Saving Time).

To Make Corrections,

repeatedly push to move the cursor

to the incorrect entry and make the

correction.

3

Push MENU twice

to starUheclock

and exit this mode.

............. SET CLOCK ................

1/ 4/1997 SAT 12:00PM

DST:ON

SET :•< ► KEY
START :MBJU KEY

16

Advertising