Vcr and cassette information, Video heads sensor system, Spring (first sunday in april) – Panasonic OMNIVISION VHS PV-7662 User Manual

Page 5: Autumn (last sunday in october), Erase protection (record tab), Maximum record/playback time, Buiid-in head cieaner, Head cleaning, Specifications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

VCR and Cassette Information

Erase Protection (Record Tab)

Cassettes have a record tab to ensure that
recordings are not accidentally erased.

To prevent accidental

erasure, break off the tab
with a screwdriver! ----------

To record again, cover the

hoie with celiophane tape.

Reset all VCR Memory Functions

Use when moving the VCR to a new location, or if a mistake

was made in the One Time VCR Setup section.

• Make sure a tape is not inserted in the VCR.

1) Turn VCR Power on.

2) Push and hold both PLAY and CHANNEL

A

on the VCR

for more than 5 seconds.

• The power will shut off.

3) Perform the One Time VCR Setup section on page 14.

Maximum Record/Playback Time

Only use tapes with the № mark in this unit.

Tape Speed

Setting

Type of Video Cassette

T60

T120

T160

SP

(Standard Play)

1 Hour

2 Hours

2 Hours

40 Minutes

LP
(Long Play)

2 Hours

4 Hours

5 Hours

20 Minutes

SLP
(Super Long Play)

3 Hours

6 Hours

8 Hours

Buiid-in Head Cieaner

A clean video head helps produce a clear picture.
So, we have equipped your VCR with a built-in, non
chemical head cleaning system that helps prevent
clogging of the video heads. Cleaning is performed
each time you load or unload a video cassette.
Note: This feature is preventative only. If your video

heads are seriously clogged, consider the use of

a chemical nonabrasive head cleaning kit or take
your VCR to a Service Center.

Head Cleaning

Your VCR will not normally require head cleaning,

however the heads may become clogged when playing
an old or damaged tape.

Video Heads Sensor System

If head cleaning becomes ______________________________

necessary, the VCR will

display the screen at right
while playing back a

recorded signal.
To exit this screen, push PLAY
on the remote control or VCR.

• Use “dry" type head

___________________

cleaning cassette* only.

• Be sure to follow the cleaning tape instructions

carefully. Excessive use of a cleaning cassette can

shorten head life.

• If using a head cleaning cassette does not solve the

problem, contact your nearest Factory Service Center
or authorized Service Center.

• Cleaning cassette part No. NV-TCL30PT is

recommended.

VIDEO HEADS MAY

NEED CLEANING
PLEASE INSERT HEAD

CLEANING CASSETTE
OR REFER TO MANUAL

END:PLAY KEY

D.S.T. (Daylight Saving Time)

Spring (First Sunday in April)

When the VCR is set to DST:ON, it automatically adds
one hour and adjusts thè clock.

NORMAL TIME

1:00 a.m. 2:00 a.m,

DAYLIGHT

SAVING TIME

3:00 a.m. 4:00 a.m.

Autumn (Last Sunday in October)

When the VCR is set to DST:ON, it automatically turns back

one hour and adjusts the clock.

DAYLIGHT

SAVING TIME

1:00 a.m. 2:00 a.m.

NORMAL TIME

1:00 a.m. 2:00 a.m.

Specifications

Power Source:

Power Consumption:

Video Signal:
Video Recording System:

Audio Track:

Tuner:

Broadcast

Channels:

CATV Channels:

Operating Temperature:
Operating Humidity:
Weight:

Dimensions:

120V AC, 60 Hz

Approx. 23 watts (Power on)
Approx. 7 watts (Power off)

ElA Standard NTSC color

4 rotary heads helical
scanning system

1 track (Normal)

2 channel (Hi-Fi Audio Sound)

VHF2~13, UHF 14-69
Midband A through I (14-22)
Superband J through W (23-36)

Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)

Special CATV channel 5A (01)

Ultraband 65-94, 100-125

4rF-104°F(5°C-40°C)

10%-75%

7.7 lbs. (3.5 kg)

16-15/16" (W)

X

3-2/3" (H)

X

11-13/16” (D)

430 (W)

X

93 (H)

X

300 (D) mm

Note: Designs and specifications are subject to change

without notice.

Advertising