Swingarm inspection, Lubrication of lever, pedals, etc – Yamaha pw80 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7.
Remove the rear shock absorber from the
machine. (To remove, pull the rear shock
backward while lifting up the frame.)
8.
When reassembling, reverse the removal
procedure taking care of the following
points:
a. Always use new cotter pins.
b. Apply the molybdenum disulfide
grease on the pins.
SWINGARM INSPECTION
1. With shock absorber removed, grasp the
ends of the swingarm and move them
from right to left to check for free play.
Swingarm free play: 1.0 mm (0.04 in)
LUBRICATION OF LEVER, PEDALS, ETC.
1. Lubricate the pivoting parts of the brake
lever with Yamaha Chain and Cable Lube
or SAE 10W30 motor oil.
2. Lubricate the shaft of the brake pedal with
lithium base grease.
-35-