Set an initial volume level, Press the demonstration button dj), Réglage d'un niveau de volume initial – Yamaha PSR-28 User Manual

Page 10: Appuyer sur la touche demonstration

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2. Set an Initial Volume Level

Slide the MASTER VOLUME control
0to a position about half way
between the "MIN" and "MAX"
setting. You can set this control for
the most comfortable volume level
after playback begins.

3. Press the DEMONSTRATION

Button dj)

The demonstration music will begin
playing as soon as you press the

DEMONSTRATDN button.
The demonstration will play continuo­
usly, providing samples of different

voices and accompaniment styles,
until the DEMONSTRATION button is
pressed a second time or the STOP
button ©is pressed.

2. Die Anfangslautstärke ein­

stellen

Schieben Sie den MASTER
VOLUME-Regler (2) ungefähr in die
Mitte zwischen "MIN"- und "MAX"-
Stellung. Nach Spielbeginn können
Sie den Regler dann auf die
gewünschte Lautstärke einstellen.

Réglage d'un niveau de volume
initial
Faire coulisser la commande
MASTER VOLUME ©sur une
position à mi-chemin entre les
positions "MIN" et "MAX". Régier

cette commande pour un niveau
d'écoute confortable après le début
de la reproduction.

Die DEMONSTRATION-Taste ®

drücken

Durch Drücken der DEMONSTRA-
TION-Tkste lösen Sie die Demo
Wedergabe aus.
Das Demostück wird kontinuierlich
mit wechselnden Stimmen und
Begleitstilen abgespielt. Zum
Abbrechen der Demo-Wiedergabe
müssen Sie nur die DEMONSTRA-
TION-Thste erneut oder die STOP-
Taste 3D drücken.

3. Appuyer sur la touche

DEMONSTRATION

®

La reproduction de la séquence de

démonstration commence dès que la
touche DEMONSTRATION est
enfoncée. La séquence de
démonstration est reproduite d'une
manière continue, donnant un
échantillon des voix et styles
d’accompagnement, jusqu'à ce que la
touche DEMONSTRATION ou la
touche STOP ©soit enfoncée.

2* Ajuste un nivel de volumen

inicial

Deslice el control MASTER
VOLUMEN ©a una posición
intermedia entre "MIN" y MAX".
Podrá ajustar este control al nivel
de volumen más apropiado después
de haberse iniciado la reproducción.

3. Presione el botón

DEMOSTRATION ®

Se iniciará la música de
demostración asf que usted presione
el botón DEMOSTRATION. La
demostración se tocará
continuamente, proporcionando
muestras de diferentes voces y
estilos de acompañamiento, hasta
que se presione por segunda vez el

botón DEMOSTRATION o hasta
que se presione el botón STOP ©.

> DEMONSTRATION

A different voice can be selected at any
time while the demonstration is playing

(refer to the appropriate sections of this
manual for instructions). Such changes,
however, will only remain in effect until

the next automatic voice.

Sie können während der Wiedergabe
andere Stimmen wählen (schlagen Sie
dazu in den entsprechenden Kapiteln
dieser Anleitung nach). Solche

Änderungen wirken jedoch nur bis

zum nächsten automatischen
Stimmen Wechsel.

II est possible de changer la voix

pendant la reproduction de la séquence
de démonstration (voir les instructions
données dans les chapitres de ce
manuel se rapportant à ces fonctions).
Ces changements ne seront effectifs,

toutefois, que jusqu'au changement
automatique suivant de la voix.

Puede seleccionarse en cualquier
momento una voz mientas se está
reproduciendo la demostración
(consulte las secciones apropiadas de
este manual para ver las
instrucciones.) Sin embargo, estos
cambios, sólo tendrán efecto hasta el
siguiente cambio de voz automática.

Advertising