Optional equipment connections, Connecting video signals sources, Vcr connection – Panasonic CT-27D42 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O
ptional
E
quipment
C
onnectíons
Optional Equipment Connections
Connecting Video Signals Sources
RF/Channel 3/4 (from antenna, cable or satellite box, or VCR)
Plug in cable from your antenna, cable or satellite box or VCR Channel 3 or 4 output to the ANT input connector. This
connector has threads to allow a screw on cable connector to be used.
CABLES NOT SUPPLIED
TERMINALS ON BACK OF TV
Video Signal
Sources
VCR Connection
VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs jack. See
the optional equipment manual for more information.
Procedure
1. Connect equipment as shown to rear Audio/Video input jacks.
2. Select the Video mode by pressing TV/VIDEO button.
Notes:
*
VIDEO 1 input is a dual-purpose input. It is primarily intended for connection with 480Í devices such as a DVD player using
the Y P
q
Pp component video jacks and Audio L
& R
jacks. However, it can also be connected to conventional composite
video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display
Component or Video 1 depending on which source is connected.
•
S-Video (input 2) provides a higher quality video input signal to the TV. The audio from the source can be connected to
INPUT 2 L and R audio.
TERMINALS ON BACK OF TV
11
•