Amplifier connection (to audio amp), Audio adjustments – Panasonic CT-27D42 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O
ptional
E
quipment
C
onnections
Amplifier Connection (To Audio Amp)
Connect to an external audio amplifier input for listening to a stereo system.
Note:
TO AUDIO AMP terminals cannot be connected direcdy to external speakers.
Audio Adjustments
1.
Select TV SPEAKERS ON from AUDIO menu.
2.
Set amplifier volume to minimum.
3.
Adjust TV volume to desired level.
4.
Adjust amplifier volume to match the TV.
5.
Select TV SPEAKERS OFF&VAO from AUDIO menu.
6.
Volume, mute, bass, treble and balance are now controlled from the TV.
Note:
In OFF&FAO the volume is controlled by the external amplifier.
TERMINALS ON BACK OF TV
Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV.
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
FWWjraOL
®
<§>
V------ P,------ P„
<3) @ ®
S-VIDEO
S-V1[K0
(input 2)
©L
[-TO AUDIO
R AMP
CABLES NOT SUPPLIED
COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV
Notes:
□
There are three video inputs, Y, P
q
, and Pp|. Separate component color inputs provide luminance and color separation. Use the L
(left) and R (right) audio from Inputsl.
□
Select DTV-STB to 4801 output mode. TV set can receive 4801 signal only.
12