Panasonic NV-G25 Series - Manual (Page 18)

OTR Function with Delayed Start
It is possible to programme an OTR recording for a TV
programme which will start immediately or within the next
24 hours.
(For example, OTR recording of a TV programme broad­
cast from 10:30 to 11:00.)
O Select the programme position (channel) to be re­
corded.
I 11
I U
□
Q Press the OTR On (+) or (-) Button to set the OTR
starting time to 10:30.
" I "
/ / / i n I n o n
I U • U D t U ‘ J U ON
I - I +
OFFL. I—^
•The "OTR” Indicator will be displayed.
0 Press the OTR Off (-1-) or (-) Button to set the OTR
ending time to 11:00.
SA
! / / i n t n - D n
t U
»
U
D t U ‘ J u
t ■ n n
t ' u u
•After setting the OTR starting time step O, the OTR Off
(+) or (-) Button must be pressed within 8 seconds to
select the OTR ending time, otherwise the selected
starting time will be cancelled.
•The VTR will automatically switch off, when the OTR is
completed. To turn the VTR on again, press the VTR
On/Off Switch.
•Make sure that the OTR Function (One-Touch
Timer Recording) does not overlap a programmed
timer recording. An OTR always takes precedence
over a timer recording.
•If you want to confirm the present time or the tape
counter position before the programmed OTR is
performed, or to check the tape counter position
during the OTR, press the Check/Programme But­
ton. To return the display to the previous indication,
press this button once more.
•It is possible to change the OTR starting time or the
ending time until the recording starts.
•It is possible to perform any VTR operation (except
timer recording) until the recording starts.
•It is possible to change the OTR ending time even
during the recording.
•To interrupt an OTR, press the VTR On/Off Switch
to turn the VTR off.
•When quickly and repeatedly pressing the OTR On
{+) or (-) Button or the OTR Off (-I-) or (-) Button,
the corresponding time indication changes in
1-minute steps. When it is kept pressed, the
indication changes in 10-minute steps.