Panasonic NV-G25 Series - Manual (Page 19)

TIMER RECORDING
The programming of timer recordings is possible both on the
VTR Itself and via the remote control unit.
Preparation
•Make sure that the Timer Reocrd Button is set to “Oft”.
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Make sure that the clock shows the present time correctly.
•Set the Tape Speed Selector to “SP” or “LP”.
Programming of Timer Recordings with the Remote
Controller
The Timer Recording Buttons (Check/Programme, Next,
Timer record) of the Remote Controller have the same
functions as the Check/Programme, Next, Timer Record
Buttons on the VTR. Therefore, instead of using the (+)
and (-) Buttons on the VTR, the Timer Recording &
Programme Position Selector Buttons of the Remote
Controlier can be used to programme timer recordings.
How to Select the Programme Position (Channel)
select channel press button
1-9
10
11-16
for example 12
1 SU
CD I' CZ)
respective channel
CD)
1 SU
CD
a MO
CD
If more than 5 seconds pass between the first, second and
third push, the channel will not be changed normally.
How to Set the Date and the Starting & Ending Times
for Timer Recordings
The date and time can be set by directly pressing the
number buttons ( [H3 ~ no ). When two buttons have to
be pressed (for example, when setting the date to a day of
the month between 10 and 31, the hour between 10 and 23,
the minute between 10 and 59), the second button must be
pressed within 2 seconds after pressing the first button.
For Example:
Programming a timer recording for a TV programme that
will be broadcast on Wednesday, October 26, from 20:00 to
22:45, on programme position (channel) 16, on timer
programme number 2. (Present date=October 8, 1988)
^ Press the Check/Programme Button to select the next
unoccupied timer programme number.
W JC"' ■ - - - -
>|V
□
PROG
^ Press the (+) or (-) Button to select the programme
position (channel) on which the TV programme will be
broadcast.
CV ON
Vv ' ■ - “ - '
OFF
V
□ 0
J
Press the Next Button.
f
^
1 ^ I'J
f U 0 “ “
□
OFF NEXT
V