Panasonic NV-G25 Series - Manual (Page 21)

For Everyday Recording To Confirm the Programme of a Timer Recording
For example:
Programme time for timer recording every day from
20:00-22:45 on timer programme number 7.
Programming for everyday recording can be made on any
of the timer programme numbers 1-7.
Execute the operation steps O to 0 as described on page
19.
Q Press the (-) Button once, so that ali day indications
wili appear together.
._________ ylUiiUilAmU______________________ _
I r
I u
J SU MO TO WE TH FR SA ^
^ T T L f T U T U T l T T ^
□
When programming an everyday recording with the
Remote Controller, press the [Ml Key twice to make all day
indications appear together.
Perform the operation steps @ to ® described on page 20.
For Everyweek Recording
For Example;
Programming a timer recording for a TV programme that is
broadcast every week on Sunday, from 20:00 to 22:45.
(T) Press the Check/Programme Button 8 times, so that
“W" indication will appear.
Make sure that the VTR is turned on.
Make sure that the Timer Record Button is set to “On”.
Select the programme number to be checked, by re­
peatedly pressing the Check/Programme Button.
The preset channel and start and ending times of the timer
recording will be indicated for about 8 seconds.
To Cancel a Timer Recording
Make sure that:
the VTR is turned on,
the “Timer Record" button is set to “Off”.
O Press the Check/Programme Button repeatedly, until
the number of the timer programme that you want to
cancel is displayed.
^ Press the (-I-) and (-) Button simultaneously for more
than 3 seconds.
•It is not possible to cancel a programmed timer recording
with the Remote Controller.
(2) Press the (+) or {-) Button to select the programme
position (channel) on which the TV programme will be
broadcast.
@ Press the Next Button.
@ Press the (+) or {-) Button to select the day of the
week, on which the programme will be broadcast.
,--------------^
I C t u
w E] 0
When programming an everyweek recording with the
Remote Controller, press any of 7 keys (01^ - ) to
select the day of the week.
Perform the operation steps 0 to 0 described on page 20.
•It is impossible to confirm programmes of timer
recordings while an OTR is being performed.
•To turn the VTR on and use it for playback or
recording before the timer recording is performed,
set the Timer Record Button to “Off”.
•When the Timer Record Button is set to “On” but no
video cassette is inserted or no timer recording has
been programmed, the Timer Recording Indicator
H will flash to inform that the timer recording cannot
be performed.
•After the programmed timer recording has been
made, set the Timer Record Button to “Off”,
otherwise the VTR cannot be operated normally.
•During recording, the programme position (channel)
on the VTR cannot be changed.
•When you want to watch TV after setting a timer
recording, select the desired channel on the TV set.
•To cancel a timer recording during recording, set
the Timer Record Button to “Off".