Vhs index search system, Oo o o – Panasonic NV-G25 Series User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

VHS INDEX SEARCH

SYSTEM

With the Index Search function, up to 20 addresses (places

where an index signal is recorded) can be skipped to
directly locate the beginning of the desired programme in
forward or reverse direction in the Fast Forward or Rewind

mode.

PLAY

®/

ff

STOP

<K1

OO

O

o

o

O

PAUSE/STILL REC«

RESET/ ME\^0RY/

IMDEX—SEARCH

OD

□ □

e o

A special index signal (for use of the VHS Index Search
function) is automatically recorded every time the Record

Button is pressed. If you want to record an additional index
signal during the recording of a programme, press the
Record Button again at the desired point.

O

Press the Play Button (►) or Stop Button (■).

0

Press the Memory/Search Button twice.

•The indication “S" appears on the Multi-Function

Display.

0

Repeatedly press the Reset/Index Button to select the

desired address.

The number of the selected address is shown on the

Multi-Function Display.

RESET/

n J

s

U L

INDEX

Q Press the Rewind ◄◄/Review @ or Fast Forward

►►/Cue © Button to start the VHS Index Search

function.

•Every time an index signal (address) is skipped the

number in the Address Indication decreases by one.

•When the preset address is reached, the Tape Counter

Indication will appear in place of the Address Indication,
and the normal playback will start.

•To abort the Index Search function midway, press the

Play or the Stop Button.

•If the recording is stopped temporarily by pressing

the Pause Button and is later resumed, no index

signal will be recorded at that position.

•It is impossible to record only index signals onto a

tape that has already been recorded.

•If a tape position without any recording is passed

during the Index Search function, that position may

be counted as an address.

•The Index Search function can only count the

addresses correctly, if the index signals are spaced
at least 2 minutes in the SP mode and 5 minutes in
the LP mode.

•If the Index Search function is started extremely

close to the beginning of the next programme

(address) or from the beginning of the tape, the first
address may not be counted.

Advertising